HabboDefense
Wired Guide: Anti-AFK Seats
Writer: PrefireStar
Graphics: buckyyyyy
Introduction
In this article, you will learn how to wire Anti-AFK Seats on Habbo Hotel. There are different ways to accomplish this but within this guide will be the simplest setup.
What you Need:
1x Chair
1x WIRED Trigger: User Performs Action
1x WIRED Effect: Show Message
1x WIRED Condition: Triggering User is on Furni
Room Set Up
Step 1
Stack together x1 Trigger: User Performs Actions, x1 Effect: Show Message & x1 Condition: Triggering User is on Furni
First things first, we need to assign what action the user needs to take to trigger the stack we’ll be working with in this guide. Double click on Trigger: User Performs Action and select the drop-down box. We are going to be selecting the action: Idle
Step 2
Next, we’ll use Effect: Show Message so that when the user goes Idle, a message will appear on their screen and wake their Habbo up.
In this part, the message can be any custom message as you see fit with the current theme you are working with.
The Delay Effect is optional, but it simply delays the time the message is sent after the user performs the action within the trigger.
Step 3
To wrap things up, we’ll use Condition: Triggering User is on Furni. This ensures that only users on the selected furni will be affected by this stack.
This is great because it ensures that only certain areas within the room are affected.
This lets you select up to 20 different pieces of furni. Once you’ve chosen all your furni, the stack will be ready for use.
This simple yet effective stack takes only a couple of minutes to set up, but it’s definitely one of the best methods.
There are several other methods you can use involving different effects, but the trigger and condition will usually stay the same.