Wired Guide: Clearing an Area
Written by: Nuela / Graphic by: Ayain
Introduction
This guide will be helpful for clearing people in an area in games or events; there are two methods: Using Freeze Tiles and Using an Object.
Method 1: Using Freeze Tiles
Use this method if you want to clear an area using Freeze Tiles! This method is more straightforward than the other method.
What you need:
1. 1x WIRED Trigger: User Says Keyword
2. 1x WIRED Effect: Toggle Furni State
3. 16x Freeze Tiles (depending on size of your area)
4. 16x Marble Tiles (or any tile you want to use)
5. 1x Counter
6. 2x Exit Tiles
7. 2x Barrel Stools (or any chair furni you want to use)
8. 1x any Stack Magic Tile
Wired Stacks:
Step 1
First, set up the area with the Freeze Tiles however you like, and place the Marble Tiles on top of the Freeze Tiles.
Step 2
Next, place down the Exit Tiles wherever you like, and stack the Barrel Stools on top of them using a Stack Magic Tile.
Step 3
Place the Counter and the Wired Stack wherever you like.
Step 4
Stack: Place down 1x WIRED Trigger: User Says Keyword, and use it. Type “:clear” in the blank, select Exact match, and set yourself as the triggerer. Click on Ready.
Step 5
Stack: Place down 1x WIRED Effect: Toggle Furni State and use it. Select “Toggle to the next state”, select the Counter, and click on Ready.
GIF Preview
There you have it! You can now clear an area with Freeze Tiles. Read on further for tips on clearing an area using an object!
Method 2: Using an Object
Use this method if you want to clear an area using an object!
What you need:
1. 2x WIRED Trigger: User Says Keyword
2. 1x WIRED Trigger: Repeat Effect
3. 1x WIRED Trigger: User Stuff Collision
4. 2x WIRED Effect: Match Furni to Position & State
5. 2x WIRED Effect: Teleport to Furni
6. 9x Grass Patches (or any flooring you want to use)
7. 5x Clawford C. Crabbington III (or any object you want to use)
8. 1x Barrel Stool (or any chair furni you want to use)
9. 1x 1×1 Stack Magic Tile
10. Optional: 15x Rubber Ducks (or any fence you want to use)
11. Optional: 1x Glass Door (or any door you want to use)
Wired Stacks:
Step 1
Place down the Grass Patches and the Crabs on top of them however you like. Ensure that the area is fenced off or edit your floor plan so that the Crabs will not move out of the area. In this guide, we will use Rubber Ducks to fence off the area.
Step 2
Stack 1: Place down 1x WIRED Trigger: User Says Keyword and use it. Type “:reset” in the blank, select “Exact match”, and pick yourself as the triggerer. Click on Ready.
Step 3
Stack 1: Place down 1x WIRED Effect: Match Furni to Position & State and use it. Select “Current position in room” and select all Crabs. Click on Ready.
Step 4
Stack 2: Place down 1x WIRED Trigger: Repeat Effect and use it. Set the timer to 0.5 seconds and click on Ready.
Step 5
Stack 2: Place down 1x WIRED Effect: Move Furni towards nearest user and use it. Select all Crabs and click on Ready (enable this setting only after fencing off the area).
Step 6
Stack 3: Place down 1x WIRED Trigger: User Says Keyword and use it. Type “:end” in the blank, select “Exact match”, and pick yourself as the triggerer. Click on Ready.
Step 7
Stack 3: Place down 1x WIRED Effect: Match Furni to Position & State and use it. Use a 1×1 Stack Magic Tile to stack the Crabs on your desired tile, select all Crabs and “Current position in room”, then click on Ready. Ensure that this tile is fenced off.
Step 8
Stack 4: Place down 1x WIRED Trigger: User Stuff Collision.
Step 9
Stack 4: Place down 1x WIRED Effect: Teleport to Furni and use it. Place down the Barrel Stool wherever you like. Select the Barrel Stool and click on Ready.
GIF Preview
Now, you can clear an area by using Freeze Tiles or by using an Object! Thank you for reading our wired guide. Read our other guides for more tips and tricks!
